Fundamental Equilibrium Concepts

# Equilibrium Constants

OpenStaxCollege

[latexpage]

### Learning Objectives

By the end of this section, you will be able to:

- Derive reaction quotients from chemical equations representing homogeneous and heterogeneous reactions
- Calculate values of reaction quotients and equilibrium constants, using concentrations and pressures
- Relate the magnitude of an equilibrium constant to properties of the chemical system

Now that we have a symbol \(\text{(⇌)}\) to designate reversible reactions, we will need a way to express mathematically how the amounts of reactants and products affect the equilibrium of the system. A general equation for a reversible reaction may be written as follows:

We can write the reaction quotient (*Q*) for this equation. When evaluated using concentrations, it is called *Q _{c}*. We use brackets to indicate molar concentrations of reactants and products.

The reaction quotient is equal to the molar concentrations of the products of the chemical equation (multiplied together) over the reactants (also multiplied together), with each concentration raised to the power of the coefficient of that substance in the balanced chemical equation. For example, the reaction quotient for the reversible reaction \(2{\text{NO}}_{2}\left(g\right)⇌{\text{N}}_{2}{\text{O}}_{4}\left(g\right)\) is given by this expression:

Writing Reaction Quotient Expressions

Write the expression for the reaction quotient for each of the following reactions:

(a) \(3{\text{O}}_{2}\left(g\right)⇌2{\text{O}}_{3}\left(g\right)\)

(b) \({\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)⇌2{\text{NH}}_{3}\left(g\right)\)

(c) \(4{\text{NH}}_{3}\left(g\right)+7{\text{O}}_{2}\left(g\right)⇌4{\text{NO}}_{2}\left(g\right)+6{\text{H}}_{2}\text{O}\left(g\right)\)

Solution

(a) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{O}}_{3}\right]}^{2}}{{\left[{\text{O}}_{2}\right]}^{3}}\)

(b) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{NH}}_{3}\right]}^{2}}{\left[{\text{N}}_{2}\right]{\left[{\text{H}}_{2}\right]}^{3}}\)

(c) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{NO}}_{2}\right]}^{4}\left[{\text{H}}_{2}\text{O}{\right]}^{6}}{{\left[{\text{NH}}_{3}\right]}^{4}\left[{\text{O}}_{2}{\right]}^{7}}\)

Check Your Learning

Write the expression for the reaction quotient for each of the following reactions:

(a) \(2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2{\text{SO}}_{3}\left(g\right)\)

(b) \({\text{C}}_{4}{\text{H}}_{8}\left(g\right)⇌2{\text{C}}_{2}{\text{H}}_{4}\left(g\right)\)

(c) \(2{\text{C}}_{4}{\text{H}}_{10}\left(g\right)+13{\text{O}}_{2}\left(g\right)⇌8{\text{CO}}_{2}\left(g\right)+10{\text{H}}_{2}\text{O}\left(g\right)\)

(a) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{SO}}_{3}\right]}^{2}}{{\left[{\text{SO}}_{2}\right]}^{2}\left[{\text{O}}_{2}\right]};\) (b) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{C}}_{2}{\text{H}}_{4}\right]}^{2}}{\left[{\text{C}}_{4}{\text{H}}_{8}\right]};\) (c) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{CO}}_{2}\right]}^{8}\left[{\text{H}}_{2}\text{O}{\right]}^{10}}{{\left[{\text{C}}_{4}{\text{H}}_{10}\right]}^{2}\left[{\text{O}}_{2}{\right]}^{13}}\)

The numeric value of *Q _{c}* for a given reaction varies; it depends on the concentrations of products and reactants present at the time when

*Q*is determined. When pure reactants are mixed,

_{c}*Q*is initially zero because there are no products present at that point. As the reaction proceeds, the value of

_{c}*Q*increases as the concentrations of the products increase and the concentrations of the reactants simultaneously decrease ([link]). When the reaction reaches equilibrium, the value of the reaction quotient no longer changes because the concentrations no longer change.

_{c}When a mixture of reactants and products of a reaction reaches equilibrium at a given temperature, its reaction quotient always has the same value. This value is called the equilibrium constant (*K*) of the reaction at that temperature. As for the reaction quotient, when evaluated in terms of concentrations, it is noted as *K _{c}*.

That a reaction quotient always assumes the same value at equilibrium can be expressed as:

This equation is a mathematical statement of the law of mass action: When a reaction has attained equilibrium at a given temperature, the reaction quotient for the reaction always has the same value.

Evaluating a Reaction Quotient

Gaseous nitrogen dioxide forms dinitrogen tetroxide according to this equation:

When 0.10 mol NO_{2} is added to a 1.0-L flask at 25 °C, the concentration changes so that at equilibrium, [NO_{2}] = 0.016 *M* and [N_{2}O_{4}] = 0.042 *M*.

(a) What is the value of the reaction quotient before any reaction occurs?

(b) What is the value of the equilibrium constant for the reaction?

Solution

(a) Before any product is formed, \(\left[{\text{NO}}_{2}\right]=\phantom{\rule{0.2em}{0ex}}\frac{0.10\phantom{\rule{0.2em}{0ex}}\text{mol}}{1.0\phantom{\rule{0.2em}{0ex}}\text{L}}\phantom{\rule{0.2em}{0ex}}=0.10\phantom{\rule{0.2em}{0ex}}M,\) and [N_{2}O_{4}] = 0 *M*. Thus,

(b) At equilibrium, the value of the equilibrium constant is equal to the value of the reaction quotient. At equilibrium, \({K}_{c}={Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{\left[{\text{N}}_{2}{\text{O}}_{4}\right]}{{\left[{\text{NO}}_{2}\right]}^{2}}=\phantom{\rule{0.2em}{0ex}}\frac{0.042}{{0.016}^{2}}\phantom{\rule{0.2em}{0ex}}=1.6\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{2}.\) The equilibrium constant is 1.6 \(×\) 10^{2}.

Note that dimensional analysis would suggest the unit for this *K _{c}* value should be

*M*

^{−1}. However, it is common practice to omit units for

*K*values computed as described here, since it is the magnitude of an equilibrium constant that relays useful information. As will be discussed later in this module, the rigorous approach to computing equilibrium constants uses dimensionless quantities derived from concentrations instead of actual concentrations, and so

_{c}*K*values are truly unitless.

_{c}Check Your Learning

For the reaction \({\text{2SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌{\text{2SO}}_{3}\left(g\right),\) the concentrations at equilibrium are [SO_{2}] = 0.90 *M*, [O_{2}] = 0.35 *M*, and [SO_{3}] = 1.1 *M*. What is the value of the equilibrium constant, *K _{c}*?

*K _{c} =* 4.3

The magnitude of an equilibrium constant is a measure of the yield of a reaction when it reaches equilibrium. A large value for *K _{c}* indicates that equilibrium is attained only after the reactants have been largely converted into products. A small value of

*K*—much less than 1—indicates that equilibrium is attained when only a small proportion of the reactants have been converted into products.

_{c}Once a value of *K _{c}* is known for a reaction, it can be used to predict directional shifts when compared to the value of

*Q*. A system that is not at equilibrium will proceed in the direction that establishes equilibrium. The data in [link] illustrate this. When heated to a consistent temperature, 800 °C, different starting mixtures of CO, H

_{c}_{2}O, CO

_{2}, and H

_{2}react to reach compositions adhering to the same equilibrium (the value of

*Q*changes until it equals the value of

_{c}*K*). This value is 0.640, the equilibrium constant for the reaction under these conditions.

_{c}It is important to recognize that an equilibrium can be established starting either from reactants or from products, or from a mixture of both. For example, equilibrium was established from Mixture 2 in [link] when the products of the reaction were heated in a closed container. In fact, one technique used to determine whether a reaction is truly at equilibrium is to approach equilibrium starting with reactants in one experiment and starting with products in another. If the same value of the reaction quotient is observed when the concentrations stop changing in both experiments, then we may be certain that the system has reached equilibrium.

Predicting the Direction of Reaction

Given here are the starting concentrations of reactants and products for three experiments involving this reaction:

Determine in which direction the reaction proceeds as it goes to equilibrium in each of the three experiments shown.

Reactants/Products | Experiment 1 | Experiment 2 | Experiment 3 |
---|---|---|---|

[CO]_{i} |
0.0203 M |
0.011 M |
0.0094 M |

[H_{2}O]_{i} |
0.0203 M |
0.0011 M |
0.0025 M |

[CO_{2}]_{i} |
0.0040 M |
0.037 M |
0.0015 M |

[H_{2}]_{i} |
0.0040 M |
0.046 M |
0.0076 M |

Solution

Experiment 1:

*Q _{c}* <

*K*(0.039 < 0.64)

_{c}The reaction will shift to the right.

Experiment 2:

*Q _{c}* >

*K*(140 > 0.64)

_{c}The reaction will shift to the left.

Experiment 3:

*Q _{c}* <

*K*(0.48 < 0.64)

_{c}The reaction will shift to the right.

Check Your Learning

Calculate the reaction quotient and determine the direction in which each of the following reactions will proceed to reach equilibrium.

(a) A 1.00-L flask containing 0.0500 mol of NO(g), 0.0155 mol of Cl2(g), and 0.500 mol of NOCl:

(b) A 5.0-L flask containing 17 g of NH_{3}, 14 g of N_{2}, and 12 g of H_{2}:

(c) A 2.00-L flask containing 230 g of SO_{3}(g):

(a) *Q _{c}* = 6.45 \(×\) 10

^{3}, shifts right. (b)

*Q*= 0.12, shifts left. (c)

_{c}*Q*= 0, shifts right

_{c}In [link], it was mentioned that the common practice is to omit units when evaluating reaction quotients and equilibrium constants. It should be pointed out that using concentrations in these computations is a convenient but simplified approach that sometimes leads to results that seemingly conflict with the law of mass action. For example, equilibria involving aqueous ions often exhibit equilibrium constants that vary quite significantly (are *not* constant) at high solution concentrations. This may be avoided by computing *K _{c}* values using the

*activities*of the reactants and products in the equilibrium system instead of their concentrations. The activity of a substance is a measure of its effective concentration under specified conditions. While a detailed discussion of this important quantity is beyond the scope of an introductory text, it is necessary to be aware of a few important aspects:

- Activities are dimensionless (unitless) quantities and are in essence “adjusted” concentrations.
- For relatively dilute solutions, a substance’s activity and its molar concentration are roughly equal.
- Activities for pure condensed phases (solids and liquids) are equal to 1.

As a consequence of this last consideration, *Q _{c}* and

*K*expressions do not contain terms for solids or liquids (being numerically equal to 1, these terms have no effect on the expression’s value)

_{c}*.*Several examples of equilibria yielding such expressions will be encountered in this section.

# Homogeneous Equilibria

A homogeneous equilibrium is one in which all of the reactants and products are present in a single solution (by definition, a homogeneous mixture). In this chapter, we will concentrate on the two most common types of homogeneous equilibria: those occurring in liquid-phase solutions and those involving exclusively gaseous species. Reactions between solutes in liquid solutions belong to one type of homogeneous equilibria. The chemical species involved can be molecules, ions, or a mixture of both. Several examples are provided here.

In each of these examples, the equilibrium system is an aqueous solution, as denoted by the *aq* annotations on the solute formulas. Since H_{2}O(*l*) is the solvent for these solutions, its concentration does not appear as a term in the *K _{c}* expression, as discussed earlier, even though it may also appear as a reactant or product in the chemical equation.

Reactions in which all reactants and products are gases represent a second class of homogeneous equilibria. We use molar concentrations in the following examples, but we will see shortly that partial pressures of the gases may be used as well.

Note that the concentration of H_{2}O(*g*) has been included in the last example because water is not the solvent in this gas-phase reaction and its concentration (and activity) changes.

Whenever gases are involved in a reaction, the partial pressure of each gas can be used instead of its concentration in the equation for the reaction quotient because the partial pressure of a gas is directly proportional to its concentration at constant temperature. This relationship can be derived from the ideal gas equation, where *M* is the molar concentration of gas, \(\frac{n}{V}.\)

Thus, at constant temperature, the pressure of a gas is directly proportional to its concentration.

Using the partial pressures of the gases, we can write the reaction quotient for the system \({\text{C}}_{2}{\text{H}}_{6}\left(g\right)⇌{\text{C}}_{2}{\text{H}}_{4}\left(g\right)+{\text{H}}_{2}\left(g\right)\) by following the same guidelines for deriving concentration-based expressions:

In this equation we use *Q _{P}* to indicate a reaction quotient written with partial pressures: \({P}_{{\text{C}}_{2}{\text{H}}_{6}}\) is the partial pressure of C

_{2}H

_{6}; \({P}_{{\text{H}}_{2}},\) the partial pressure of H

_{2}; and \({P}_{{\text{C}}_{2}{\text{H}}_{6}},\) the partial pressure of C

_{2}H

_{4}. At equilibrium:

The subscript *P* in the symbol *K _{P}* designates an equilibrium constant derived using partial pressures instead of concentrations. The equilibrium constant,

*K*, is still a constant, but its numeric value may differ from the equilibrium constant found for the same reaction by using concentrations.

_{P}Conversion between a value for *K _{c}*, an equilibrium constant expressed in terms of concentrations, and a value for

*K*, an equilibrium constant expressed in terms of pressures, is straightforward (a

_{P}*K*or

*Q*without a subscript could be either concentration or pressure).

The equation relating *K _{c}* and

*K*is derived as follows. For the gas-phase reaction \(m\text{A}+n\text{B}⇌x\text{C}+y\text{D:}\)

_{P}The relationship between *K _{c}* and

*K*is

_{P}In this equation, Δ*n* is the difference between the sum of the coefficients of the *gaseous* products and the sum of the coefficients of the *gaseous* reactants in the reaction (the change in moles of gas between the reactants and the products). For the gas-phase reaction \(m\text{A}+n\text{B}⇌x\text{C}+y\text{D,}\) we have

Calculation of *K _{P}*

Write the equations for the conversion of

*K*to

_{c}*K*for each of the following reactions:

_{P}(a) \({\text{C}}_{2}{\text{H}}_{6}\left(g\right)⇌{\text{C}}_{2}{\text{H}}_{4}\left(g\right)+{\text{H}}_{2}\left(g\right)\)

(b) \(\text{CO}\left(g\right)+{\text{H}}_{2}\text{O}\left(g\right)⇌{\text{CO}}_{2}\left(g\right)+{\text{H}}_{2}\left(g\right)\)

(c) \({\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)⇌2{\text{NH}}_{3}\left(g\right)\)

(d) *K _{c}* is equal to 0.28 for the following reaction at 900 °C:

What is *K _{P}* at this temperature?

Solution

(a) Δ*n* = (2) − (1) = 1

*K _{P}* =

*K*(

_{c}*RT*)

^{Δn}=

*K*(

_{c}*RT*)

^{1}=

*K*(

_{c}*RT*)

(b) Δ*n* = (2) − (2) = 0

*K _{P}* =

*K*(

_{c}*RT*)

^{Δn}=

*K*(

_{c}*RT*)

^{0}=

*K*

_{c}(c) Δ*n* = (2) − (1 + 3) = −2

*K _{P}* =

*K*(

_{c}*RT*)

^{Δn}=

*K*(

_{c}*RT*)

^{−2}= \(\frac{{K}_{c}}{{\left(RT\right)}^{2}}\)

(d) *K _{P}* =

*K*(RT)

_{c}^{Δn}= (0.28)[(0.0821)(1173)]

^{−2}= 3.0 \(×\) 10

^{−5}

Check Your Learning

Write the equations for the conversion of *K _{c}* to

*K*for each of the following reactions, which occur in the gas phase:

_{P}(a) \(2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2{\text{SO}}_{3}\left(g\right)\)

(b) \({\text{N}}_{2}{\text{O}}_{4}\left(g\right)⇌2{\text{NO}}_{2}\left(g\right)\)

(c) \({\text{C}}_{3}{\text{H}}_{8}\left(g\right)+5{\text{O}}_{2}\left(g\right)⇌3{\text{CO}}_{2}\left(g\right)+4{\text{H}}_{2}\text{O}\left(g\right)\)

(d) At 227 °C, the following reaction has *K _{c}* = 0.0952:

What would be the value of *K _{P}* at this temperature?

(a) *K _{P}* =

*K*(

_{c}*RT*)

^{−1}; (b)

*K*=

_{P}*K*(

_{c}*RT*); (c)

*K*=

_{P}*K*(

_{c}*RT*); (d) 160 or 1.6 \(×\) 10

^{2}

# Heterogeneous Equilibria

A heterogeneous equilibrium is a system in which reactants and products are found in two or more phases. The phases may be any combination of solid, liquid, or gas phases, and solutions. When dealing with these equilibria, remember that solids and pure liquids do not appear in equilibrium constant expressions (the activities of pure solids, pure liquids, and solvents are 1).

Some heterogeneous equilibria involve chemical changes; for example:

Other heterogeneous equilibria involve phase changes, for example, the evaporation of liquid bromine, as shown in the following equation:

We can write equations for reaction quotients of heterogeneous equilibria that involve gases, using partial pressures instead of concentrations. Two examples are:

# Key Concepts and Summary

For any reaction that is at equilibrium, the reaction quotient *Q* is equal to the equilibrium constant *K* for the reaction. If a reactant or product is a pure solid, a pure liquid, or the solvent in a dilute solution, the concentration of this component does not appear in the expression for the equilibrium constant. At equilibrium, the values of the concentrations of the reactants and products are constant. Their particular values may vary depending on conditions, but the value of the reaction quotient will always equal *K* (*K _{c}* when using concentrations or

*K*when using partial pressures).

_{P}A homogeneous equilibrium is an equilibrium in which all components are in the same phase. A heterogeneous equilibrium is an equilibrium in which components are in two or more phases. We can decide whether a reaction is at equilibrium by comparing the reaction quotient with the equilibrium constant for the reaction.

# Key Equations

- \(Q=\phantom{\rule{0.2em}{0ex}}\frac{\left[\text{C}{\right]}^{x}{\left[\text{D}\right]}^{y}}{\left[\text{A}{\right]}^{m}{\left[\text{B}\right]}^{n}}\phantom{\rule{5em}{0ex}}\text{where}\phantom{\rule{0.2em}{0ex}}m\text{A}+n\text{B}⇌x\text{C}+y\text{D}\)
- \({Q}_{P}=\phantom{\rule{0.2em}{0ex}}\frac{{\left({P}_{C}\right)}^{x}{\left({P}_{D}\right)}^{y}}{{\left({P}_{A}\right)}^{m}{\left({P}_{B}\right)}^{n}}\phantom{\rule{5em}{0ex}}\text{where}\phantom{\rule{0.2em}{0ex}}m\text{A}+n\text{B}⇌x\text{C}+y\text{D}\)
*P*=*MRT**K*=_{P}*K*(_{c}*RT*)^{Δn}

# Chemistry End of Chapter Exercises

Explain why there may be an infinite number of values for the reaction quotient of a reaction at a given temperature but there can be only one value for the equilibrium constant at that temperature.

Explain why an equilibrium between Br_{2}(*l*) and Br_{2}(*g*) would not be established if the container were not a closed vessel shown in [link].

Equilibrium cannot be established between the liquid and the gas phase if the top is removed from the bottle because the system is not closed; one of the components of the equilibrium, the Br_{2} vapor, would escape from the bottle until all liquid disappeared. Thus, more liquid would evaporate than can condense back from the gas phase to the liquid phase.

If you observe the following reaction at equilibrium, is it possible to tell whether the reaction started with pure NO_{2} or with pure N_{2}O_{4}?

\(2{\text{NO}}_{2}\left(g\right)⇌{\text{N}}_{2}{\text{O}}_{4}\left(g\right)\)

Among the solubility rules previously discussed is the statement: All chlorides are soluble except Hg_{2}Cl_{2}, AgCl, PbCl_{2}, and CuCl.

(a) Write the expression for the equilibrium constant for the reaction represented by the equation \(\text{AgCl}\left(s\right)⇌{\text{Ag}}^{\text{+}}\left(aq\right)+{\text{Cl}}^{\text{−}}\left(aq\right).\) Is *K _{c}* > 1, < 1, or ≈ 1? Explain your answer.

(b) Write the expression for the equilibrium constant for the reaction represented by the equation \({\text{Pb}}^{2+}\left(aq\right)+2{\text{Cl}}^{\text{−}}\left(aq\right)⇌{\text{PbCl}}_{2}\left(s\right).\) Is *K _{c}* > 1, < 1, or ≈ 1? Explain your answer.

(a) *K _{c}* = [Ag

^{+}][Cl

^{−}] < 1. AgCl is insoluble; thus, the concentrations of ions are much less than 1

*M*; (b) \({K}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{1}{\left[{\text{Pb}}^{2+}\right]{\left[{\text{Cl}}^{\text{−}}\right]}^{2}}\) > 1 because PbCl

_{2}is insoluble and formation of the solid will reduce the concentration of ions to a low level (<1

*M*).

Among the solubility rules previously discussed is the statement: Carbonates, phosphates, borates, and arsenates—except those of the ammonium ion and the alkali metals—are insoluble.

(a) Write the expression for the equilibrium constant for the reaction represented by the equation \({\text{CaCO}}_{3}\left(s\right)⇌{\text{Ca}}^{2+}\left(aq\right)+{\text{CO}}_{3}{}^{\text{−}}\left(aq\right).\) Is *K _{c}* > 1, < 1, or ≈ 1? Explain your answer.

(b) Write the expression for the equilibrium constant for the reaction represented by the equation \(3{\text{Ba}}^{2+}\left(aq\right)+2{\text{PO}}_{4}{}^{3-}\left(aq\right)⇌{\text{Ba}}_{3}{\left({\text{PO}}_{4}\right)}_{2}\left(s\right).\) Is *K _{c}* > 1, < 1, or ≈ 1? Explain your answer.

Benzene is one of the compounds used as octane enhancers in unleaded gasoline. It is manufactured by the catalytic conversion of acetylene to benzene: \(3{\text{C}}_{2}{\text{H}}_{2}\left(g\right)\phantom{\rule{0.2em}{0ex}}⟶\phantom{\rule{0.2em}{0ex}}{\text{C}}_{6}{\text{H}}_{6}\left(g\right).\) Which value of *K _{c}* would make this reaction most useful commercially?

*K*≈ 0.01,

_{c}*K*≈ 1, or

_{c}*K*≈ 10. Explain your answer.

_{c}Since \({K}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{\left[{\text{C}}_{6}{\text{H}}_{6}\right]}{{\left[{\text{C}}_{2}{\text{H}}_{2}\right]}^{3}},\) a value of *K _{c}* ≈ 10 means that C

_{6}H

_{6}predominates over C

_{2}H

_{2}. In such a case, the reaction would be commercially feasible if the rate to equilibrium is suitable.

Show that the complete chemical equation, the total ionic equation, and the net ionic equation for the reaction represented by the equation \(\text{KI}\left(aq\right)+{\text{I}}_{2}\left(aq\right)⇌{\text{KI}}_{3}\left(aq\right)\) give the same expression for the reaction quotient. KI_{3} is composed of the ions K^{+} and \({\text{I}}_{3}{}^{\text{−}}.\)

For a titration to be effective, the reaction must be rapid and the yield of the reaction must essentially be 100%. Is *K _{c}* > 1, < 1, or ≈ 1 for a titration reaction?

*K _{c}* > 1

For a precipitation reaction to be useful in a gravimetric analysis, the product of the reaction must be insoluble. Is *K _{c}* > 1, < 1, or ≈ 1 for a useful precipitation reaction?

Write the mathematical expression for the reaction quotient, *Q _{c}*, for each of the following reactions:

(a) \({\text{CH}}_{4}\left(g\right)+{\text{Cl}}_{2}\left(g\right)⇌{\text{CH}}_{3}\text{Cl}\left(g\right)+\text{HCl}\left(g\right)\)

(b) \({\text{N}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2\text{NO}\left(g\right)\)

(c) \(2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2{\text{SO}}_{3}\left(g\right)\)

(d) \({\text{BaSO}}_{3}\left(s\right)⇌\text{BaO}\left(s\right)+{\text{SO}}_{2}\left(g\right)\)

(e) \({\text{P}}_{4}\left(g\right)+5{\text{O}}_{2}\left(g\right)⇌{\text{P}}_{4}{\text{O}}_{10}\left(s\right)\)

(f) \({\text{Br}}_{2}\left(g\right)⇌2\text{Br}\left(g\right)\)

(g) \({\text{CH}}_{4}\left(g\right)+2{\text{O}}_{2}\left(g\right)⇌{\text{CO}}_{2}\left(g\right)+2{\text{H}}_{2}\text{O}\left(l\right)\)

(h) \({\text{CuSO}}_{4}\text{·}5{\text{H}}_{2}\text{O}\left(s\right)⇌{\text{CuSO}}_{4}\left(s\right)+5{\text{H}}_{2}\text{O}\left(g\right)\)

(a) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{\left[{\text{CH}}_{3}\text{Cl}\right]\left[\text{HCl}\right]}{\left[{\text{CH}}_{4}\right]\left[{\text{Cl}}_{2}\right]};\) (b) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[\text{NO}\right]}^{2}}{\left[{\text{N}}_{2}\right]\phantom{\rule{0.2em}{0ex}}\left[{\text{O}}_{2}\right]};\) (c) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[{\text{SO}}_{3}\right]}^{2}}{{\left[{\text{SO}}_{2}\right]}^{2}\left[{\text{O}}_{2}\right]};\) (d) *Q _{c}* = [SO

_{2}]; (e) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{1}{\left[{\text{P}}_{4}\right]{\left[{\text{O}}_{2}\right]}^{5}};\) (f) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{{\left[\text{Br}\right]}^{2}}{\left[{\text{Br}}_{2}\right]};\) (g) \({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{\left[{\text{CO}}_{2}\right]}{\left[{\text{CH}}_{4}\right]{\left[{\text{O}}_{2}\right]}^{2}};\) (h)

*Q*= [H

_{c}_{2}O]

^{5}

Write the mathematical expression for the reaction quotient, *Q _{c}*, for each of the following reactions:

(a) \({\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)⇌2{\text{NH}}_{3}\left(g\right)\)

(b) \(4{\text{NH}}_{3}\left(g\right)+5{\text{O}}_{2}\left(g\right)⇌4\text{NO}\left(g\right)+6{\text{H}}_{2}\text{O}\left(g\right)\)

(c) \({\text{N}}_{2}{\text{O}}_{4}\left(g\right)⇌2{\text{NO}}_{2}\left(g\right)\)

(d) \({\text{CO}}_{2}\left(g\right)+{\text{H}}_{2}\left(g\right)⇌\text{CO}\left(g\right)+{\text{H}}_{2}\text{O}\left(g\right)\)

(e) \({\text{NH}}_{4}\text{Cl}\left(s\right)⇌{\text{NH}}_{3}\left(g\right)+\text{HCl}\left(g\right)\)

(f) \(2\text{Pb}{\left({\text{NO}}_{3}\right)}_{2}\left(s\right)⇌2\text{PbO}\left(s\right)+4{\text{NO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)\)

(g) \(2{\text{H}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2{\text{H}}_{2}\text{O}\left(l\right)\)

(h) \({\text{S}}_{8}\left(g\right)⇌8\text{S}\left(g\right)\)

The initial concentrations or pressures of reactants and products are given for each of the following systems. Calculate the reaction quotient and determine the direction in which each system will proceed to reach equilibrium.

(a) \(2{\text{NH}}_{3}\left(g\right)⇌{\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{c}=17;\) [NH_{3}] = 0.20 *M*, [N_{2}] = 1.00 *M*, [H_{2}] = 1.00 *M*

(b) \(2{\text{NH}}_{3}\left(g\right)⇌{\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{P}=6.8\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{4};\) initial pressures: NH_{3} = 3.0 atm, N_{2} = 2.0 atm, H_{2} = 1.0 atm

(c) \(2{\text{SO}}_{3}\left(g\right)\phantom{\rule{0.2em}{0ex}}⇌2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{c}=0.230;\) [SO_{3}] = 0.00 *M*, [SO_{2}] = 1.00 *M*, [O_{2}] = 1.00 *M*

(d) \(2{\text{SO}}_{3}\left(g\right)⇌2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{P}=16.5;\) initial pressures: SO_{3} = 1.00 atm, SO_{2} = 1.00 atm, O_{2} = 1.00 atm

(e) \(2\text{NO}\left(g\right)+{\text{Cl}}_{2}\left(g\right)⇌2\text{NOCl}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{c}=4.6\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{4};\) [NO] = 1.00 *M*, [Cl_{2}] = 1.00 *M*, [NOCl] = 0 *M*

(f) \({\text{N}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2\text{NO}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{P}=0.050;\) initial pressures: NO = 10.0 atm, N_{2} = O_{2} = 5 atm

(a) *Q*_{c} 25 proceeds left; (b) *Q _{P}* 0.22 proceeds right; (c)

*Q*undefined proceeds left; (d)

_{c}*Q*1.00 proceeds right; (e)

_{P}*Q*0 proceeds right; (f)

_{P}*Q*4 proceeds left

_{c}The initial concentrations or pressures of reactants and products are given for each of the following systems. Calculate the reaction quotient and determine the direction in which each system will proceed to reach equilibrium.

(a) \(2{\text{NH}}_{3}\left(g\right)⇌{\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{c}=17;\) [NH_{3}] = 0.50 *M*, [N_{2}] = 0.15 *M*, [H_{2}] = 0.12 *M*

(b) \(2{\text{NH}}_{3}\left(g\right)⇌{\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{P}=6.8\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{4};\) initial pressures: NH_{3} = 2.00 atm, N_{2} = 10.00 atm, H_{2} = 10.00 atm

(c) \(2{\text{SO}}_{3}\left(g\right)⇌2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{c}=0.230;\) [SO_{3}] = 2.00 *M*, [SO_{2}] = 2.00 *M*, [O_{2}] = 2.00 *M*

(d) \(2{\text{SO}}_{3}\left(g\right)⇌2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{P}=6.5\phantom{\rule{0.2em}{0ex}}\text{atm;}\) initial pressures: SO_{2} = 1.00 atm, O_{2} = 1.130 atm, SO_{3} = 0 atm

(e) \(2\text{NO}\left(g\right)+{\text{Cl}}_{2}\left(g\right)⇌2\text{NOCl}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{P}=2.5\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{3};\) initial pressures: NO = 1.00 atm, Cl_{2} = 1.00 atm, NOCl = 0 atm

(f) \({\text{N}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2\text{NO}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{c}=0.050;\) [N_{2}] = 0.100 *M*, [O_{2}] = 0.200 *M*, [NO] = 1.00 *M*

The following reaction has *K _{P}* = 4.50 \(×\) 10

^{−5}at 720 K.

\({\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)⇌2{\text{NH}}_{3}\left(g\right)\)

If a reaction vessel is filled with each gas to the partial pressures listed, in which direction will it shift to reach equilibrium? *P*(NH_{3}) = 93 atm, *P*(N_{2}) = 48 atm, and *P*(H_{2}) = 52

The system will shift toward the reactants to reach equilibrium.

Determine if the following system is at equilibrium. If not, in which direction will the system need to shift to reach equilibrium?

\({\text{SO}}_{2}{\text{Cl}}_{2}\left(g\right)⇌{\text{SO}}_{2}\left(g\right)+{\text{Cl}}_{2}\left(g\right)\)

[SO_{2}Cl_{2}] = 0.12 *M*, [Cl_{2}] = 0.16 *M* and [SO_{2}] = 0.050 *M*. *K _{c}* for the reaction is 0.078.

Which of the systems described in [link] give homogeneous equilibria? Which give heterogeneous equilibria?

(a) homogenous; (b) homogenous; (c) homogenous; (d) heterogeneous; (e) heterogeneous; (f) homogenous; (g) heterogeneous; (h) heterogeneous

Which of the systems described in [link] give homogeneous equilibria? Which give heterogeneous equilibria?

For which of the reactions in [link] does *K _{c}* (calculated using concentrations) equal

*K*(calculated using pressures)?

_{P}This situation occurs in (a) and (b).

For which of the reactions in [link] does *K _{c}* (calculated using concentrations) equal

*K*(calculated using pressures)?

_{P}Convert the values of *K _{c}* to values of

*K*or the values of

_{P}*K*to values of

_{P}*K*.

_{c}(a) \({\text{N}}_{2}\left(g\right)+3{\text{H}}_{2}\left(g\right)⇌2{\text{NH}}_{3}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{c}=0.50\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}400\phantom{\rule{0.2em}{0ex}}\text{°C}\)

(b) \({\text{H}}_{2}\left(g\right)+{\text{I}}_{2}\left(g\right)⇌2\text{HI}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{c}=50.2\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}448\phantom{\rule{0.2em}{0ex}}\text{°C}\)

(c) \({\text{Na}}_{2}{\text{SO}}_{4}\text{·}10{\text{H}}_{2}\text{O}\left(s\right)⇌{\text{Na}}_{2}{\text{SO}}_{4}\left(s\right)+10{\text{H}}_{2}\text{O}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{P}=4.08\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{-25}\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}25\phantom{\rule{0.2em}{0ex}}\text{°C}\)

(d) \({\text{H}}_{2}\text{O}\left(l\right)⇌{\text{H}}_{2}\text{O}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{P}=0.122\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}50\phantom{\rule{0.2em}{0ex}}\text{°C}\)

(a) *K _{P}* = 1.6 \(×\) 10

^{−4}; (b)

*K*= 50.2; (c)

_{P}*K*= 5.31 \(×\) 10

_{c}^{−39}; (d)

*K*= 4.60 \(×\) 10

_{c}^{−3}

Convert the values of *K _{c}* to values of

*K*or the values of

_{P}*K*to values of

_{P}*K*.

_{c}(a) \({\text{Cl}}_{2}\left(g\right)+{\text{Br}}_{2}\left(g\right)⇌2\text{BrCl}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{c}=4.7\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{-2}\text{at}\phantom{\rule{0.2em}{0ex}}25\phantom{\rule{0.2em}{0ex}}\text{°C}\)

(b) \(2{\text{SO}}_{2}\left(g\right)+{\text{O}}_{2}\left(g\right)⇌2{\text{SO}}_{3}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{P}=48.2\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}500\phantom{\rule{0.2em}{0ex}}\text{°C}\)

(c) \({\text{CaCl}}_{2}\text{·}6{\text{H}}_{2}\text{O}\left(s\right)⇌{\text{CaCl}}_{2}\left(s\right)+6{\text{H}}_{2}\text{O}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{P}=5.09\phantom{\rule{0.2em}{0ex}}×\phantom{\rule{0.2em}{0ex}}{10}^{-44}\text{at}\phantom{\rule{0.2em}{0ex}}25\phantom{\rule{0.2em}{0ex}}\text{°C}\)

(d) \({\text{H}}_{2}\text{O}\left(l\right)⇌{\text{H}}_{2}\text{O}\left(g\right)\phantom{\rule{5em}{0ex}}{K}_{P}=0.196\phantom{\rule{0.2em}{0ex}}\text{at}\phantom{\rule{0.2em}{0ex}}60\phantom{\rule{0.2em}{0ex}}\text{°C}\)

What is the value of the equilibrium constant expression for the change \({\text{H}}_{2}\text{O}\left(l\right)⇌{\text{H}}_{2}\text{O}\left(g\right)\) at 30 °C?

\({K}_{P}={P}_{{\text{H}}_{2}\text{O}}=0.042.\)

Write the expression of the reaction quotient for the ionization of HOCN in water.

Write the reaction quotient expression for the ionization of NH_{3} in water.

\({Q}_{c}=\phantom{\rule{0.2em}{0ex}}\frac{\left[{\text{NH}}_{4}{}^{\text{+}}\right]\left[{\text{OH}}^{\text{−}}\right]}{\left[{\text{HN}}_{3}\right]}\)

What is the approximate value of the equilibrium constant *K _{P}* for the change \({\text{C}}_{2}{\text{H}}_{5}{\text{OC}}_{2}{\text{H}}_{5}\left(l\right)⇌{\text{C}}_{2}{\text{H}}_{5}{\text{OC}}_{2}{\text{H}}_{5}\left(g\right)\) at 25 °C. (Vapor pressure was described in the previous chapter on liquids and solids; refer back to this chapter to find the relevant information needed to solve this problem.)

## Glossary

- equilibrium constant (
*K*) - value of the reaction quotient for a system at equilibrium

- heterogeneous equilibria
- equilibria between reactants and products in different phases

- homogeneous equilibria
- equilibria within a single phase

*K*_{c}- equilibrium constant for reactions based on concentrations of reactants and products

*K*_{P}- equilibrium constant for gas-phase reactions based on partial pressures of reactants and products

- law of mass action
- when a reversible reaction has attained equilibrium at a given temperature, the reaction quotient remains constant

- reaction quotient (
*Q*) - ratio of the product of molar concentrations (or pressures) of the products to that of the reactants, each concentration (or pressure) being raised to the power equal to the coefficient in the equation